yankee-flyer
Well Known Member
Well, for the moment (at least) my exhaust pipe is centered in the cutout side-to-side but hits the aft end-- easy fix. My real question is, we're supposed to put hi-temp RTV in the muffler springs. It's not clear whether you're supposed to completely fill the springs (make a solid cylinder) or just fill the spaces betweel the coils. Either way looks like a pretty messy operation-- if you completely fill the spring won't that make it extremely difficult to remove the muffler for inspections? What have you who are past this point done?
Thanks very much
Wayne 120241 (who spent WAAAYY too much time on that blasted colwling)
Thanks very much
Wayne 120241 (who spent WAAAYY too much time on that blasted colwling)