VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet

  #1  
Old 11-28-2022, 10:53 AM
claycookiemonster's Avatar
claycookiemonster claycookiemonster is offline
 
Join Date: Oct 2007
Location: Midway, UT
Posts: 555
Default Easiest Instrument panel mock-up?

I want to assemble the instrument panel components to do the initial wiring and to check how the overall arrangement works and looks. I know I've seen some "test" panels here, but can't find them now. I don't want to do this on the official panel, so how are you guys assembling the components and holding them in place for this? Plywood? I'm finding that splintery and hard to get right. Another aluminum sheet?
__________________
Clay "Cookiemonster" Cook
USAF: T-38, F-111F
American Airlines: 727, MD80, 757, 767, 737
RV8 #81751 project sold
RV8 #81651 project acquired
https://theonceandfutureflyer.wordpress.com/
Donations up to date thru December 2022

"...serenity...courage...and wisdom..."
Reply With Quote
  #2  
Old 11-28-2022, 11:00 AM
Weefle's Avatar
Weefle Weefle is offline
 
Join Date: Sep 2020
Location: Vernon BC
Posts: 223
Default

Try plexiglass then you see whatís on the other side.

Keith
__________________
____________________________________________

RV-10 in progress
CGMMD reserved
Dues paid till 2024
Reply With Quote
  #3  
Old 11-28-2022, 11:15 AM
Kyle Boatright Kyle Boatright is offline
 
Join Date: Aug 2005
Location: Atlanta, GA
Posts: 5,141
Default

Iíve used Luan. Cheap and easy to work with.
__________________
Kyle Boatright
Marietta, GA
2001 RV-6 N46KB
2019? (actually 2022) RV-10 N46BX
Reply With Quote
  #4  
Old 11-29-2022, 04:07 PM
RV8Squaz's Avatar
RV8Squaz RV8Squaz is offline
 
Join Date: Feb 2006
Location: Senoia, Georgia
Posts: 984
Default

Quote:
Originally Posted by Weefle View Post
Try plexiglass then you see whatís on the other side.

Keith
This is what my favorite avionics shop does. Works well. They showed me the mock up with everything in it before cutting any metal.
__________________
Jerry Esquenazi
RV-8 N84JE
Reply With Quote
  #5  
Old 11-29-2022, 04:23 PM
PaulvS's Avatar
PaulvS PaulvS is offline
 
Join Date: Aug 2019
Location: Western Australia
Posts: 1,324
Default

If you want to use aluminum rather than ply or plexi then commercial grade aluminum is quite cheap. I got a sheet of 5005 alloy 4' x 8' .040 for about $30. It is also available thicker .063 same as the factory panels. This alloy is a bit softer than 2024 but for a trial run it is fine and an advantage is you work it with the same tools as the real panel.

Edit
A panel blank from Vans is only $35 (plus shipping) so another thought is to use one of those for the "test" panel and then you may well get it right on the first go, so it becomes the "real" panel!
I have been using a cardboard overlay with taped on full size prints of screen, instruments and radio etc.during initial mockup. It's obviously easy to move things around, before going to the effort of actually cutting a test panel.
__________________
Paul vS (yes I'm also a Van)
Building RV-6A #22320 O-320 FP. Wings and tail complete, fuselage almost done, working on canopy.
Flying my Aeroprakt A-22 STOL and the aero club's RV-9A while I build

Last edited by PaulvS : 11-29-2022 at 06:22 PM. Reason: Vans panel blank option
Reply With Quote
  #6  
Old 11-29-2022, 04:37 PM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 5,559
Default

Quote:
Originally Posted by Weefle View Post
Try plexiglass then you see whatís on the other side.

Keith
Recommend polycarbonate like Lexan rather than acrylic, because it's less likely to crack.

Dave
Reply With Quote
  #7  
Old 11-29-2022, 06:09 PM
graywoodworking graywoodworking is offline
 
Join Date: Dec 2021
Location: Merrimack
Posts: 10
Default

I bought duplicate parts from Vans and assembled a panel and the first bulkhead. That way I was sure everything fit perfectly. I wired everything on the bench and powered everything up. It was easy to then transfer everything to the plane.
__________________
Larry Gray
N486LJ
RV-14A
S/N 140367
Reply With Quote
  #8  
Old 12-04-2022, 10:08 AM
rockitdoc's Avatar
rockitdoc rockitdoc is offline
 
Join Date: May 2020
Location: Fort Collins, CO
Posts: 779
Default Foam Board

Like this. Easy to cut. Cheap.

Click image for larger version

Name:	Panel v3.0.jpg
Views:	41
Size:	395.0 KB
ID:	34687

Click image for larger version

Name:	Panel Mockup view of aft subpanel.jpg
Views:	35
Size:	317.9 KB
ID:	34688

hot glue
__________________
14A-EXP119 Thunderbolt
Begun 07-23-20
Emp Completed 11-12-20
Slo Fuse Completed 3-2-21
QB Wings 99% Complete 7-30-22
Wiring and Avionics 85%
Cowl Completed sans paint 10-30-22!
2023 Dues Paid
Reserved: N52XL
Reply With Quote
  #9  
Old 12-04-2022, 02:35 PM
mulde35d's Avatar
mulde35d mulde35d is offline
 
Join Date: Dec 2017
Location: Clarksville, TN
Posts: 309
Default

If you are any good with Microsoft and have access to Visio it is great for entering actual dimensions. You can then position everything digitally and when you print it is printed to the exact dimensions. I then tape the paper to the panel and start drilling /cutting. Has worked really well
Attached Thumbnails
Click image for larger version

Name:	B1EC7D44-7F92-4093-A98C-5142A8DAFA71.jpeg
Views:	19
Size:	274.3 KB
ID:	34691  
__________________
Jon
RV-14A Sold
RV-10 Empennage - Complete
Wings - Complete
Fuselage - Crating
Finish - On Order
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:42 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.