I'm removing the hinges and going with screws, just like the bottom of the cowl.
I don't like the hinge pin interference and impossibly small hole (oil door) to install and remove same, and I don't care for how Camlocs hold up over the years (broken retaining springs mostly, bad experience with Mooney).
Retired Firmware Guy and Airplane Builder
2020 RV-14 QB -- Under construction - Tailcone & Empennage Complete.
2018 RV-7 QB -- Built, Flying
2007 RV-7 QB -- Built, Drowned, Resurrected and flying
1998 RV-8 QB -- Started, Sold
1986 Mooney 205SE
1980 Mooney 231
Aided and abetted building a number of other RV's.