Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Go Back   VAF Forums > Model Specific > RV-6/6A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-14-2020, 05:59 PM
Coaltowngarage Coaltowngarage is offline
Join Date: Aug 2019
Location: Altoona,AL
Posts: 49
Default Aluminum angle material substitute?

Building this early 90s kit. Was passed around a bit over the years. As you can imagine...theres stuff missing. On my plans, it calls for an aluminum angle 1 inch by 1 1/4 by 1/8 that runs from the lower corner of the firewall to the wing spar bulkhead 604. I see on vans website they do not carry a 1 x 1.25 x. 125 angle. I appears that vans no longer offers this size angle. Does anyone know of an acceptable replacement material for this section? It appears to be the only place on the plane that this dimension material is called for.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 10:31 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.