VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-23-2021, 06:35 AM
RV701775 RV701775 is offline
 
Join Date: Jul 2019
Location: Boston, MA
Posts: 70
Default Rivet Pitch/Spacing Question

I have a question regarding rivet pitch. I elongated one of the holes by 7/64in in the end of the rudder counterbalance rib where the skin wraps around the forward end of the rib. Vans recommended that I put an additional rivet between the two existing to provide extra strength, but there is only 0.9in of spacing between the existing. The mil-spec required 0.56in but this will leave me with only 0.45in. How important is pitch in this scenario?
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:16 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.