I'm finishing the inventory on a 6 fuse kit and am a bit unsure about some pieces of angle.
In the pick list vans sent it mentions 7 pieces of "J channelx8 feet", and also says this is "alum stiffener angle". Since my fuse kit is second hand some labelling is missing, the nearest unidentified parts I have to this "J channel" is 6 pieces of aluminium angle, 3/4x3/4x.063x12 feet. These are of course an L shape rather than a J. Am I correct that these are NOT the J channel I require? Likely a silly question but I'd rather only order bits I need and not double up unnecessarily!
Thanks.
In the pick list vans sent it mentions 7 pieces of "J channelx8 feet", and also says this is "alum stiffener angle". Since my fuse kit is second hand some labelling is missing, the nearest unidentified parts I have to this "J channel" is 6 pieces of aluminium angle, 3/4x3/4x.063x12 feet. These are of course an L shape rather than a J. Am I correct that these are NOT the J channel I require? Likely a silly question but I'd rather only order bits I need and not double up unnecessarily!
Thanks.
