My aft and center fuse are flipped over as i do side skins and such. Vans has you put a sawhorse under the 704 bulkhead and aft fuse. Well I learned the hard way that the the 704 bulkhead can’t take the stress and is highly unstable forward and aft. Today the unit shifted after I removed the side skins (which gave the unit a ton of stability) and the 704 bulkhead completely bent and collapsed.
So now I have to reorder the vertical sections of the bulkhead, drill out a ton of rivets, and repair.
Does anyone have a good and stable solution for the upside down canoe? Especially without the side skins on?
So now I have to reorder the vertical sections of the bulkhead, drill out a ton of rivets, and repair.
Does anyone have a good and stable solution for the upside down canoe? Especially without the side skins on?