Clamp

Is there such an animal as a symmetrical Adel clamp?
I'm looking for a clamp that connects at the center. A circular clamp with two ears instead of a "P" shaped clamp like the Adel.
Or
Has anyone bent the ears on an Adel?

wirejock said:

Has anyone bent the ears on an Adel?

Click to expand...

Many times

I don't recommend doing it with the aluminum version (might be ok, I just don't), but on the stainless steel version it has never been a problem.

Reshape clamp

rvbuilder2002 said:

Many times

I don't recommend doing it with the aluminum version (might be ok, I just don't), but on the stainless steel version it has never been a problem.

Click to expand...

Awesome. I'll try tomorrow. Thx

rvbuilder2002 said:

Many times

I don't recommend doing it with the aluminum version (might be ok, I just don't), but on the stainless steel version it has never been a problem.

Click to expand...

Yep, this is fine.

Larry: Are you wanting to clamp wiring or tubing?

Here's one style:

https://ph.parker.com/us/en/clamps-series-o

cvairwerks said:

Larry: Are you wanting to clamp wiring or tubing?

Here's one style:

https://ph.parker.com/us/en/clamps-series-o

Click to expand...

I'm fabricating leg stiffeners.
https://vansairforce.net/community/showpost.php?p=1616205&postcount=62
I fought with Adel clamps all day yesterday. Rubber pad removed. On my 7A, I could not install the stiffener with a spacer perpendicular to the leg and in line with the fuse centerline. I got close but the fairing wouldn't close. Modified Adel clamps should work perfect because the flat can be bolted between the tabs and the flat can be rotated to align with the fairing. I will post results to the thread above.