Filter for radio interference

Hey Guys, I recently installed an Electroair electronic ignition, and now I'm getting some static on my com radios when receiving. When I shut the ignition off and run on the mag it goes away. I had to run a couple power wires all the way back to the battery and it appears at some point they are running to close to the antenna cables or some audio wires.

Before I tear back into all the wiring, I have to at least check and see if there's some sort of filter I can put on the power wires? I'm pretty sure I know the answer but it doesn't hurt to ask. The battery is easy to get to. The back of the radios....not so much.

Search for:
clip on ferrite core

no magic bullet but it'll make a little difference

Rallylancer122 said:

The battery is easy to get to. The back of the radios....not so much.

Click to expand...

IMHO you want to be looking at shielding the ignition, not filtering the radios.