brass bushing for aileron pivot

gib

Active Member

• Mar 13, 2013

• #1

Does anybody have the part number for the brass bushing that goes in the bell crank for the aileron (RV-7). I just messed mine up at work and need to order a new one but my prints are at home. Thanks for your help. Okay I know I spelled Pivot wrong, I tried to edit it but it will not allow me to.

 

Last edited by a moderator: Mar 13, 2013

C

crabandy

Well Known Member

• Mar 13, 2013

• #2

I just looked at the plans and didn't see a part #, it is just referenced as brass bushing in drawing 15A RV-7. I would just call and reference the drawing # and Vans should be able to find it.

 

cka357

Active Member

• Mar 13, 2013

• #3

Aileron Bushings

gib,

The part numbers for the -7 bell crank is WD-421-L and WD-421-R.

I did a search on Vans in the parts section and found them.
Search for "bellcrank busing".

BELLCRANK BUSHING 789
BUSH-BS.245X375X2.781

$4.80

Good Luck,

Chuck

 

Mike S

Senior Curmudgeon

• Mar 13, 2013

• #4

gib said:

Okay I know I spelled Pivot wrong, I tried to edit it but it will not allow me to.

Click to expand...

Got that taken care of for you.

 

gib

Active Member

• Mar 13, 2013

• #5

Thank You Gentlemen another disaster averted.

 

Last edited: Mar 13, 2013