VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
  #1  
Old 11-15-2016, 04:28 PM
cguarino cguarino is offline
 
Join Date: May 2005
Posts: 378
Default A couple of engine assembly questions

I'm finally about to reassemble my engine after a main bearing failure. I've read the service instructions but I want some advice from guys that do this regularly. My first question is what do you use to pre-lube the cam and lifters and the bearings when assembling the engine? Lycoming recommends lubricants that are near impossible to find. My second question is about the case sealant. Lycoming has approved 3 methods. Perfect Seal #4 and silk thread, Loctite 515 and RTV 102. Which one works the best? Thanks in advance for the help.
__________________
Charlie "T.Bear" Guarino
Springtown, TX
RV-4 Flying again with a fresh overhaul
Exempt but paid
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:58 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.