KatanaPilot
Well Known Member
One of my concerns about the hall sensor wiring on our SDS equipped RV-10 is a belt break damaging the wiring. Don’t really know if it’s a valid concern and in my case I have two belts.
I have prototyped a shield for the wires attached to the hall sensor attach bracket. SDS provides threaded mounting holes just for this purpose.
I am looking for additional ideas from anyone who has addressed this concern on their installation to see if I’m on the right track or if someone has a genius idea they wouldn’t mind my copying.
If you prefer not to post here or find it cumbersome to post pictures, please email me. Krea dot Ellis at gmail dot com
Thanks!
I have prototyped a shield for the wires attached to the hall sensor attach bracket. SDS provides threaded mounting holes just for this purpose.
I am looking for additional ideas from anyone who has addressed this concern on their installation to see if I’m on the right track or if someone has a genius idea they wouldn’t mind my copying.
If you prefer not to post here or find it cumbersome to post pictures, please email me. Krea dot Ellis at gmail dot com
Thanks!