VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
  #1  
Old 03-23-2017, 03:28 PM
Mark C. Mark C. is offline
 
Join Date: Nov 2009
Location: Schaumburg
Posts: 119
Default cracking clear coat on Cowl

I have just over 58 hours on my 9A and I now have spider cracks in my clear coat, its not down to the paint just in the clear. The location is a little forward of the oil door. My observation says it might be the top cowl expansion while in flight. The bottom cowl is open where the 2 exhausts come out plus I added while building on each side of the bottom cowl 4X12" louvers. My temps are good EGT's at 340 and CHT at 1260. What have other flying 9 builders done to get the forced air through the cowl. Pictures would be helpful.. Thanks, Mark C. 119RV
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:01 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.