No special torque mentioned, so standard -6 torque -- 160 in/lbs. then continue as needed up to 190 in/lbs to align the hole in the bolt to the nut castellations so you can fit in the cotter pin. (All according to my old original KAIs..)
Van's RV-12 #120566 - ELSA - N49DD
Spinks Airport, KFWS, Fort Worth, TEXAS!
LSRI-A for N49DD / EAA / AOPA
Pvt Pilot since '79! / USNR - MA2
Retired LEO / PADI MSDT / SDI OW Instructor
Scuba Equipment Tech (PT Retirement Job)
ďIf you can walk away from a landing, itís a good landing. If you can use the aircraft the next day, itís an outstanding landing.Ē Ė Chuck Yeager