What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Garmin 375 & Digitrak AP

TigerMan92

Well Known Member
Sponsor
I'm looking to change out my KMD150 to a GNX375. The 375 manual doesn't show that it supports the Digitrak AP. The AP takes the standard NMEA 183 format which you think the 375 would support.

Can the 375 feed this AP?

Thanks,
 
I'm looking to change out my KMD150 to a GNX375. The 375 manual doesn't show that it supports the Digitrak AP. The AP takes the standard NMEA 183 format which you think the 375 would support.

Can the 375 feed this AP?

Thanks,
Gene,

I don't think any IFR navigator will have an NMEA 0183 format serial output, and the GNX 375 is no exception.

Some of the TT autopilots will accept an Aviation Output format for lateral navigation, and the GNX 375 can provide that format.

The Digitrak manual I just downloaded says that it will interface to a GNS 430/530 using Aviation format, so I would try Aviation Output 1 RS-232 format on the GNX 375 and see if that works.

Steve
 
Last edited:
Back
Top