Baffle Corners

What is your technique for closing the corner baffles with the baffle material?

Wrap one of the baffle pieces around a corner? Trim the top at an angle, put a small corner piece or?

Pictures?

I want to seal the corners but the current set-up I am working with on my -10 puts too much material in the corner and it bunches up.

Just curious to understand what others are doing.

E

On mine, the piece of material along the back baffle is cut just longer (wider) than the outside of the baffle sides. The baffle material along the baffle sides is cut where it rests up against the seal material along the back of the baffle. As the cowl top presses down, it presses both the back and side pieces down and they overlap and seal.