I am looking to buy an rv-6a. If I find one that has steam gauges I am looking for an idea for cost to convert it to something like the 10" classic VFR system that is listed on their sale brochure. It looks like the parts are around $14000 for the Dynon. What other companies should I consider that might be as good for a cheaper price?
It looks like the Advanced Flight Systems might be an easier install (just from a video I saw about their backplane interconnect) but I would assume the cost would be higher.
Thanks for any help .
Rob
Here is a list of the items for the panel-
10” SkyView Classic Display
Primary Wiring Harness - SkyView
ADAHRS - Primary
SkyView Backup Battery
SkyView Knob Control Panel
Wi-Fi Adapter
Network Cables
Pitot Probe, heated - underwing
Standard Engine Monitoring Module
3' Network Cable
Lyc 4-cyl probes
SV32, SV42, SV52 Servos need a total of 2
Network Servo Wiring
Network 5 Port Hub
Servo Mounting Brackets
Class 1, Mode-S, FAA 2020 ADS-B Out and in
High Integrity GPS for 2020
ADS-B Dual Band Traffic and Weather
VHF COM Radio, 25 kHz
2-Place Stereo Intercom
It looks like the Advanced Flight Systems might be an easier install (just from a video I saw about their backplane interconnect) but I would assume the cost would be higher.
Thanks for any help .
Rob
Here is a list of the items for the panel-
10” SkyView Classic Display
Primary Wiring Harness - SkyView
ADAHRS - Primary
SkyView Backup Battery
SkyView Knob Control Panel
Wi-Fi Adapter
Network Cables
Pitot Probe, heated - underwing
Standard Engine Monitoring Module
3' Network Cable
Lyc 4-cyl probes
SV32, SV42, SV52 Servos need a total of 2
Network Servo Wiring
Network 5 Port Hub
Servo Mounting Brackets
Class 1, Mode-S, FAA 2020 ADS-B Out and in
High Integrity GPS for 2020
ADS-B Dual Band Traffic and Weather
VHF COM Radio, 25 kHz
2-Place Stereo Intercom
Last edited: