1. I have tried to set the AOA calibrations on several flights without success. The minimum visible and caution alert settings show indications set but the stall warning indicates accepted but when done is pressed it indicates calibration unacceptable. I have re-read the instructions and followed them by performing a power off stall as instructed, indicates accepted but when done is pressed, states calibration not successful. What am I missing?
2. On takeoff I have started to experience high EGT reading on #1 cylinder (1400+) but CHTs are all well below 400. EGT only remains high for short period until I reduce prop setting from full to my climb setting of 2400.
2. On takeoff I have started to experience high EGT reading on #1 cylinder (1400+) but CHTs are all well below 400. EGT only remains high for short period until I reduce prop setting from full to my climb setting of 2400.