robjohnson
Well Known Member
After about 48 hours of flight time, my taxi light bulb blew (I have wig wags and run them constantly). Well, in my infinite wisdom and attempt to replace the bulb, I ruined the reflector/bulb socket. I didn't know until after the face that there is a screw on the back side that needs to be loosened to release the bulb.
Does anyone know the brand or size of the rectangular lights used in the Duckworks kits? I did some rough measuring yesterday of the reflector, but I didn't write it down (I was honked off because I ruined the stupid thing). I'd like to swing by an auto parts place on the way to the hangar today, but I don't want to get the wrong size.
Any ideas on the size??
Rob
Does anyone know the brand or size of the rectangular lights used in the Duckworks kits? I did some rough measuring yesterday of the reflector, but I didn't write it down (I was honked off because I ruined the stupid thing). I'd like to swing by an auto parts place on the way to the hangar today, but I don't want to get the wrong size.
Any ideas on the size??
Rob