Proseal for rudder

Will 1 once of proseal complete the rudder trailing g edge?

Thanks

I believe the small container should suffice!

I used the double-sided tape and it worked great. I believe that is what the plans show. Why do you want to use pro-seal?

ProSeal on Rudder

I just did mine yesterday, didn't need much to glue up the trailing edge, I mixed it in 2 batches since I have B1/2 and didn't use much more than an ounce if that. I sealed the wedge to the right skin clecoed to an aluminum angle I drilled up, let it cure, then did the left as I "zipped it up" like the plans say. The final product is straight as an arrow. Wasn't as bad as I expected.

1 oz is plenty - just be ready when you mix it because the working time is short.