VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-06-2021, 07:39 AM
Dennis Harm Dennis Harm is offline
 
Join Date: Feb 2015
Location: Cadott wisconsin
Posts: 48
Default Glare shield edging

Hi everyone. Building the 14A and wondering what you’re using for the glare shield edge. Checked McMaster Carr and can’t find anything that would look good, thanks Dennis
Reply With Quote
  #2  
Old 01-06-2021, 07:51 AM
rv8ch's Avatar
rv8ch rv8ch is offline
 
Join Date: Feb 2005
Location: LSGY
Posts: 3,684
Default

Many ways to skin that cat - here's what I did. Idea from Kevin Horton, really happy with the results.

http://www.rv8.ch/glareshield-protection/

Click image for larger version

Name:	img_0662.jpg
Views:	245
Size:	250.5 KB
ID:	6669

Quote:
Got this from Kevin Horton, originally posted by RV-6 builder Mark Nielsen:
==============================
For my glareshield, I mounted a piece of 3/8″ soft aluminum tubing (same as
fuel line) along the aft edge of the glareshield. I cut a lengthwise slot
in the tubing, pushed it on the aft edge of the glareshield, and held it in
place with fillets of epoxy along the top and bottom. I was pleased with
the results. It gives the glareshield a nice “beaded” edge that looks right
in place next to the tubular frame that supports it (tip-up canopy). The
tube also stiffens the glareshield considerably and eliminates the “sharp”
aft edge.

To cut the slot in the tubing, I used a 3″ cutting disk mounted in a drill
press. I drilled a 3/8″ hole near the edge of a 2×4 and cut a slot between
the center of the hole and the edge. This was clamped vertically on the
drill press
so the cutting disc protrudes through the slot into the center of the hole.
The tube was pushed through the hole to cut the slot. (I drew a guide line
along the length of the tube so I could cut the slot straight.)

I used Power Poxy (Walmart) for the fillets. It has the consistency of very
soft modeling clay, is easy to use, sets up in about 30 minutes, and sands
easily. The application tool was my finger moistened with rubbing alcohol.
__________________
Mickey Coggins
http://rv8.ch
"Hello, world!"
Reply With Quote
  #3  
Old 01-06-2021, 07:59 AM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 1,246
Default

The edging from cleaveland tools works perfectly with no fabrication.
__________________
Ser 140142, RV-14A flying - N1463
Ser 83825, RV-8 building - N8638?
USN Ret, Urologist, AME, Repeat Offender
Reply With Quote
  #4  
Old 01-06-2021, 08:11 AM
bhester's Avatar
bhester bhester is offline
 
Join Date: Jan 2005
Location: Hopkinsville, KY
Posts: 1,001
Thumbs up My edging

In 2005, I ordered mine from McMaster Carr, I think it was Style 6
Click image for larger version

Name:	1C2A70F9-9ABE-4E87-8CC8-95E867F9D469.jpeg
Views:	277
Size:	148.7 KB
ID:	6671 Click image for larger version

Name:	6B661E7A-FA4E-4555-819C-95DE2E7ED2B2.jpeg
Views:	232
Size:	148.0 KB
ID:	6670
__________________
Bobby Hester - Builder/Pilot/A&P
Surfing the web from Hopkinsville, KY
N857BH RV7A XP-O360 - Garmin G3X ADS-B IN/OUT 2020 Compliant
Web site: http://www.newtech.com/bobbyhester/RVSite.htm
Dec. 2020 VAF donator - alot better than any magazine subscription
Reply With Quote
  #5  
Old 01-06-2021, 11:32 AM
Swiss14A Swiss14A is offline
 
Join Date: Feb 2018
Location: Switzerland
Posts: 24
Default Kantenschutz :)

Here is a source for Europe based builders:
https://www.kantenschutzprofi.de

I ordered:
KS0-1S , KS-TPE0-2,5S and KS-TPE1-2S,
and have not decided yet which to use
__________________
Alexandra & Fabian
RV14 HB-YAF, in progress
Reply With Quote
  #6  
Old 01-06-2021, 11:46 AM
Jpm757's Avatar
Jpm757 Jpm757 is offline
 
Join Date: May 2013
Location: Sherman, CT
Posts: 929
Default

Got mine from Classic Aero, nicely stitched and padded and came with a template for fitting.
https://i.postimg.cc/YCF4dTGS/2356-lrg.jpg
__________________
Jake
RV6 #20477 completed 1991 sold.
RV7 #72018 N767T first flight 11/21/2017
(KOXC)Oxford, CT, (0NY0)North Creek, NY.
1941 J3 Cub skis, floats.
Building Javron Super Cub.
2020 dues gladly paid.
Reply With Quote
  #7  
Old 01-06-2021, 01:15 PM
RV10Pilot RV10Pilot is offline
 
Join Date: Jan 2005
Location: Medford, NJ USA
Posts: 364
Default

This is what I used on my 10. Heavy Duty Plastic Trim, 1/32"-1/8" Wide x 7/16" High Inside, Pebbled
https://www.mcmaster.com/catalog/126/4053
Reply With Quote
  #8  
Old 02-04-2021, 06:02 PM
Northernliving Northernliving is offline
 
Join Date: May 2005
Location: Boston, MA
Posts: 507
Default

Quote:
Originally Posted by bhester View Post
In 2005, I ordered mine from McMaster Carr, I think it was Style 6
Attachment 6671 Attachment 6670
Also used McMaster-Carr. Got the part number here on VAF from similar conversations. Part number 8451A22. Looks good, simple, cheap and works. What not to like.
__________________
Brian J.
Boston, MA
RV8 Based at ORH - Purchased
RV8 - The Project #83313 - Under Construction
Reply With Quote
  #9  
Old 01-06-2021, 07:45 PM
Dennis Harm Dennis Harm is offline
 
Join Date: Feb 2015
Location: Cadott wisconsin
Posts: 48
Default Edging

Thanks for the reply’s everyone
Reply With Quote
  #10  
Old 01-07-2021, 03:41 AM
RViator60 RViator60 is offline
 
Join Date: Nov 2019
Location: Southport, NC
Posts: 73
Default

Jeremiah at Classic Aero told me they are planning to produce their RV-7/9 Glareshield liner for the RV-14, but it's not available yet. Abby at Flightline Interiors told me she has their version available with is quite nice. Both are retailing in the $200-$300 range. I decided to buy some Trim-Lok along with some synthetic leather to fashion my own liner. I purchase 60 mm computer fan covers to hold the fabric down. I may include the forward edging idea that Mickey posted. I'll probably glue the fabric to some 1/4" foam and then Velcro the whole thing in place.
__________________
Marty Guinn
Based at KSUT, Southport, NC
- 1973 PA28-180 (N55087)
RV14A Build
- Started Sep19, Aft Fuse complete
- Wings and fuel tanks completed,
- IO390 ordered (Oct20 deliv)
- Hartzell 2-blade composite delivered.
- Currently working on fuselage
https://eaabuilderslog.org/?s=MartysRV14A
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:35 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.