What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Elevator travel 11-6 step 6

jamcgee1978

Active Member
Afternoon all,

Wondered if you could offer advice,

I have mounted the elevators but my travel is 26° up and 30° down . My worry is if I file away the F1012D to gain the extra 4° it may be enough material for the elevator stop to potentially jam as per service bull 18-03-30. My inspector has suggested we manufacture a stop using Delrin at the 30° up but I would seek vans advice primarily before going away from plans. Have attached a few pics for clarity. Anybody had any similar issues with this and advice more than welcomed

Thanks James
https://drive.google.com/open?id=1vwWRDBFRkOBc8Zpu5LwL3wJjwrRgWth6
https://drive.google.com/open?id=1FU968uB29-tEf33UuOMokSJQiTjdArFv
https://drive.google.com/open?id=1bZ4KAomgj5iaHymmAe5i5dzQam71qLHb
 
Elevator stop

I just finished remaking my elevator stop per Van?s Bulletin. I think going that route should solve your problem.

Rick
RV10
 
Back
Top