What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Engine RPM/Manifold pressure avoid range

Sportquattro

Well Known Member
I have an O-320-D2A with a MTV-11 propeller which has a restricted RPM range for continuous operation between 2050 and 2300 RPM with a manifold pressure higher than 22"

Is there a way to configure the G3x touch to show this avoid range on the RPM when manifold pressure is higher than 22”.
 
Unfortunately, no -- there's no dynamic + logic combination available for RPM & MAP. Most folks just set a yellow arc on the RPM gauge and MAP.
 
Last edited:
Unfortunately, no -- there's no dynamic + logic combination available for RPM & MAP. Most folks just set a yellow arc on the RPM gauge and MAP.

Thanks Brian that’s pretty much what I expected, ever the optimist though. Thanks again for a speedy response, much appreciated
 
Back
Top