What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

trim servo question

Chipper G

Well Known Member
where is everyone running the wire from the trim servo to the plane. I see the hole in the elevator for the trim cable and i see that the RA servo threaded end moves thru that hole so not sure running the wire there is a great idea. I wonder if i can drill a small hole just below that with a grommet?
 
My practice is to secure that cable to the elevator horn with zip ties. Once inside the fuselage leaving a loose loop for strain relief before securing the wiring going forward.
 
Back
Top