What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

gap between engine baffle and top cowl

fabio

Active Member
is it enough 3/8 of gap between the aluminum baffle and the top cowl?
in the instruction is write minimum 3/8 and max 1/2 inch
 
is it enough 3/8 of gap between the aluminum baffle and the top cowl?
in the instruction is write minimum 3/8 and max 1/2 inch

3/8" is pretty close. I certainly wouldn't want any less than that. Lycomings shake pretty good, especially during start up and shutting down.
 
Back
Top