Tail beacon wiring ?

Hi, I’m in the process of wiring a LED ( flyled) self contained tail strobe/ position light in my RV 6. As this requires only very small power use & it is self powered in the tail do I require shielded wire or not ? Thanks

Per the Flyleds instruction sheet:

The Tail Strobe needs one or two runs of standard 18 to 22AWG wire for power. You may link the Strobe and Position inputs together for use with a single power circuit.
Connect the light to the appropriate Strobe and Position switches on your panel.

So you only need standard and not shielded wire.