Ellison EFS-3 Diaphragm found

Helping a friend today with an Ellison EFS-3 (the smaller one with the one inlet valve)

Anyways, the diaphragm appears to be the exact match to the one I have here for my 070 Stihl power saw with a Tillotson carb.

https://sawparts.ca/products/stihl-08-070-090-ts350-ts360-carb-kit-for-tillotson-carburetor

Seems to be part number: TILLOTSON RK-83HL


Mike

Awesome. Thanks so much Mike, I have added this information to what I am collecting and preserving for all of us.
Keep them flying!

I need the same for the Ellison 4-5

Any suggestions on how to cross reference? Did you find 1:1 pictures of the Tillotson kits anywhere? Or some dia. measurements of the Diaphragm ?

mechmike said:

Helping a friend today with an Ellison EFS-3 (the smaller one with the one inlet valve)

Anyways, the diaphragm appears to be the exact match to the one I have here for my 070 Stihl power saw with a Tillotson carb.

https://sawparts.ca/products/stihl-08-070-090-ts350-ts360-carb-kit-for-tillotson-carburetor

Seems to be part number: TILLOTSON RK-83HL


Mike

Click to expand...

Nope. I had two carb kits for my 070 on top of my fridge and by memory they looked similar. So I looked.

Matched them up as you see in the photo above and they seem to be correct.

The diaphragm for the Ellison 4-5 has been figured out already on this board, you'll have to search I don't know it.

Mike