VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 07-29-2021, 09:50 AM
Anders Anders is offline
 
Join Date: Aug 2018
Location: Norway
Posts: 3
Default Numatx HTS-C3K3 - Problem solved

I have a Numatx HTS-C3K3 squeezer that has been working well since I bought it 2,5 years ago. In April this year it started to leak air from the pedal when not in use. It still worked. I contacted Numatx (hy-technic.com) and they sent a new pedal which did not help. After some more communication they informed me that the unit was out of warranty, but that I could send them the unit for repair, but I would have to carry the freight both ways and the repair cost.

I then decided to open the intensifier that I expected was the culprit. Very much so. The piston plate had ben unscrewed from the piston rod (see picture). I cleaned the parts screwed the plate back on the rod, added some hydraulic fluid and closed the intensifier.

Now works as before.

Regards

Anders
Attached Thumbnails
Click image for larger version

Name:	20210729_161735.jpg
Views:	42
Size:	274.7 KB
ID:	14128  
__________________
Anders Nilsson
(Norway, Saab Safir driver)
RV14 Kit #140529
Empennage done
Tailcone done
Working on fuse
QB wings on order
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:17 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.