VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
  #1  
Old 08-25-2013, 08:08 PM
tkatc's Avatar
tkatc tkatc is offline
 
Join Date: Nov 2007
Location: NJ
Posts: 1,747
Default Landing gear alignment?

Anyone have a good write up of how they did the landing gear alignment? I'm using the grove airfoil gear so it is slightly different than Van's stock gear but very similar. I've searched here and google along with the usual sites but haven't stumbled upon one that fills in all the blanks. "Alignment for dummies".

I have 2 pieces of 8' angle from Home Depot waiting to be put to good use. I plan to clamp them to the gear and start measuring from different points but I DO NOT want to screw up this very critical step. I have zero tailwheel time as it is...the last thing I need is misaligned gear.

I assume I'm only aligning 2 planes:
1. They must be parallel so the wheels are aligned to each other
2. They must also be aligned with the centerline of the fuse.

Do I have that right? Parallel to each other seems easy enough...but parallel to the fuse raises more questions than answers. I've been thinking about running a laser line down the belly of the inverted fuse and take measurements from that...
__________________
My ATC opinion is NOT an official FAA recognized opinion, so any advice you get from me is ONLY my opinion.

Track my RV7A!!

Bought my flying -7A
Building an -8! (Fuse)

Last edited by tkatc : 08-25-2013 at 09:01 PM.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:15 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.