VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #11  
Old 02-26-2021, 02:57 AM
buchaneer buchaneer is offline
 
Join Date: Jun 2014
Location: Washington Tyne & Wear England.
Posts: 38
Default Photo

Cheers Larry, a picture speaks a 1000 words,
Any reason you fitted the heater control on another plate? I thought it was pop riveted to the firewall.
With not buying the FWF kit I think I may have overlooked a few of the minor items, namely penetrations etc. I went on advice of a fellow multi RV builder in just buying the essentials from the FWF inventory list due to costs.
Thanks,
Duncan
__________________
Duncan Kenworthy
QB RV-9A Tip-up (has become slowbuild !!)
Tail feathers and wings done apart from glasswork! Working on the rest!
Reg number reserved: G-RVSK
Donation made for 2020
Reply With Quote
  #12  
Old 02-26-2021, 10:26 AM
buchaneer buchaneer is offline
 
Join Date: Jun 2014
Location: Washington Tyne & Wear England.
Posts: 38
Default Bag 983

Trying to fit new engine mount to my QB fuselage.
Bolting arrangements different with different nuts & bolts from original nose leg mount.
Cannot find an inventory for bag 983 which I think I have identified the new bolts in but cannot identify 4 steel bushes ( there are 6 mounting bolts)as to where they are fitted.
Anyone got a bag inventory list for this bag.
Cheers,
Duncan
__________________
Duncan Kenworthy
QB RV-9A Tip-up (has become slowbuild !!)
Tail feathers and wings done apart from glasswork! Working on the rest!
Reg number reserved: G-RVSK
Donation made for 2020
Reply With Quote
  #13  
Old 02-26-2021, 04:19 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,330
Default Heater control

Quote:
Originally Posted by buchaneer View Post
Cheers Larry, a picture speaks a 1000 words,
Any reason you fitted the heater control on another plate? I thought it was pop riveted to the firewall.
With not buying the FWF kit I think I may have overlooked a few of the minor items, namely penetrations etc. I went on advice of a fellow multi RV builder in just buying the essentials from the FWF inventory list due to costs.
Thanks,
Duncan
It's not on another plate. It has a silicone gasket. Two holes for bolts from the inside and a 2" hole for the heat flange.
I bought the FWF kit but deleted several items like governor, exhaust, alternator.
I still place an order to AS daily!
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #14  
Old 02-26-2021, 04:24 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,330
Default Bag 983

Quote:
Originally Posted by buchaneer View Post
Trying to fit new engine mount to my QB fuselage.
Bolting arrangements different with different nuts & bolts from original nose leg mount.
Cannot find an inventory for bag 983 which I think I have identified the new bolts in but cannot identify 4 steel bushes ( there are 6 mounting bolts)as to where they are fitted.
Anyone got a bag inventory list for this bag.
Cheers,
Duncan
BAG 983 HARDWARE ITEMS
AN310-6 NUT,CASTLE 3/8
AN365-624A NUT,STOP 3/8-24
AN6-12A AN BOLT
AN6-14 AN BOLT
AN6-23A AN BOLT
BUSH-ST.375X688X375 STEEL BUSHING
MS21045-6 3/8-LOCKNUT
NAS1149F0632P REPLACES AN960-616L
NAS1149F0663P REPLACES AN960-616
WASHER-00015 Steel Washer
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:54 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.