VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-18-2016, 08:19 AM
Flying Griff Flying Griff is offline
 
Join Date: Jul 2012
Location: Ottawa, Canada
Posts: 8
Default G3X Touch oil pressure display in RV-12

When doing my first pressure purge, I noticed the oil pressure reading on the G3X EFIS never fell below 15. On closer inspection, I found it just displays "underscores" at initial boot-up. It jumps to 15 psi as a first value. However, fuel pressure values clearly go down to "0".

Has anyone else with a G3X system noticed this? Or does your oil pressure display values right down to "0"? (in fact, the Rotax manual says the baseline for the probe will often be 3 psi).

I am building EAB and cannot use the stock Vans downloadable config files. There appear to be some restrictions on the minimum value in the pre-set G3X stock config settings for my Rotax 456180 oil pressure sender. This sender became standard on engines manufactured after the summer of 2012 (sn 6780435 onwards). If G3X-equipped RV12's with the new-style sender are displaying down to zero, I will need to pursue the oil pressure sensor set-up in the current Vans G3X configuration screen.

Hope my first attempt at image insertion works and thanks for any input,
Griff

[IMG][/IMG]
__________________
Griff
RV12 build in progress
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:01 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.