What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

How to remove switches

BH1166

Well Known Member
I need to remove switches for panel upgrade. I can’t determine the manufacturer, in turn can’t determine how these detach. They are individually installed, not a bracket of sorts with all attached. Thanks
 

Attachments

  • 305BCBD0-1986-4277-8A7B-4C18ED4D166A.jpg
    305BCBD0-1986-4277-8A7B-4C18ED4D166A.jpg
    157.2 KB · Views: 208
  • 01F45315-8E5F-449D-A838-D3CCB55E76D9.jpeg
    01F45315-8E5F-449D-A838-D3CCB55E76D9.jpeg
    902.9 KB · Views: 236
They look like Honeywell AML switches.

https://sps.honeywell.com/us/en/pro...es/rocker-switches/aml-series-rocker-switches

Try pushing from the rear and wiggling them around. Spring clips hold them in place with a wedging action.

Thanks Mike/Larry/John/Keith…. Dim sumsabitches did NOT want to release. Precision hole for the 7 left little to no “wiggle room”. Made a couple tools to shove between, ( I named it :) ) removed and wiggled best I could and got one to finally pop loose. Found out no service length, so to get it out, not only did I have to get EIGHT wedge clips to let go, but the connections had to come off too. Thanks as always for the crazy good support you get from other RV’rs.
 

Attachments

  • 0064375D-45E5-45B5-839F-FCF6201C41AB.jpg
    0064375D-45E5-45B5-839F-FCF6201C41AB.jpg
    392.7 KB · Views: 183
  • E89CF921-2765-4EEB-9BE2-B0128AA6C5B7.jpg
    E89CF921-2765-4EEB-9BE2-B0128AA6C5B7.jpg
    259.3 KB · Views: 176
  • 6A969BAA-9033-41E3-A7AE-B22314A7D2D8.jpg
    6A969BAA-9033-41E3-A7AE-B22314A7D2D8.jpg
    579.5 KB · Views: 160
Back
Top