Bill_H
Well Known Member
I acquired a plane with a 430W and GTX330ES but that has never been configured for ADSB out. i want to do that and am going through the manuals.
I do not want to use the ARINC on either box for this ADSB Out functionality.
The GTX330ES currently has working Fuel/Air data via serial IN from a GRT GXR EFIS.
The 430 will also have this, the same way.
The 430W will be interfaced to the GRT HXR via the ARINC.
I was told the 330ES will need to get quality GPS position data via a serial line from the 430W outputting the special “ADSB+ format.” Then change the integrity level to 1E-7 and enable the ADSB out. But my 430W installation manual doesn’t mention that connection or software choice, and neither does my 330ES installation manual.
Advice please! Currently the plane has a SkyBeacon For ADSB out and if I get this working I’ll sell that.
Regards, Bill H
I do not want to use the ARINC on either box for this ADSB Out functionality.
The GTX330ES currently has working Fuel/Air data via serial IN from a GRT GXR EFIS.
The 430 will also have this, the same way.
The 430W will be interfaced to the GRT HXR via the ARINC.
I was told the 330ES will need to get quality GPS position data via a serial line from the 430W outputting the special “ADSB+ format.” Then change the integrity level to 1E-7 and enable the ADSB out. But my 430W installation manual doesn’t mention that connection or software choice, and neither does my 330ES installation manual.
Advice please! Currently the plane has a SkyBeacon For ADSB out and if I get this working I’ll sell that.
Regards, Bill H