What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Main bulkhead conduit holes mods

nohoflyer

nohoflyer

Well Known Member
Patron
About to step-drill the holes into the main bulkhead per the fuselage plans. Thinking ahead at my full IFR Dynon system I’m dreaming of, does anyone recommend additional “holes” for running wires?

Did a search didn’t find any info.
 
nohoflyer said:
About to step-drill the holes into the main bulkhead per the fuselage plans. Thinking ahead at my full IFR Dynon system I’m dreaming of, does anyone recommend additional “holes” for running wires?

Did a search didn’t find any info.
Click to expand...

Depends if you run wires down the side or center. I did center and two 5/8" holes barely made it. However, Van's says two is the max you can have, at least on the 6. Not sure about the 7 as the spar designs are different.

Larry
 
You must log in or register to reply here.
Back
Top