WingnutWick
Well Known Member
Hello!
Installing ADSB this weekend (Echo UAT) and I am putting it on a wing inspection panel and I have to run the wires into the cockpit. I've got them to the fuselage port but am having a hard time figuring out how to best access them on the cabin side. There is a gray panel that won't budge when I remove all the screws and the lower panel is riveted to the floor. Do I have to remove the seat to access the panel below? Not intamitely familiar with the 10 yet and figured I'd ask before unnecessarily tearing everything apart.
Thanks!
Installing ADSB this weekend (Echo UAT) and I am putting it on a wing inspection panel and I have to run the wires into the cockpit. I've got them to the fuselage port but am having a hard time figuring out how to best access them on the cabin side. There is a gray panel that won't budge when I remove all the screws and the lower panel is riveted to the floor. Do I have to remove the seat to access the panel below? Not intamitely familiar with the 10 yet and figured I'd ask before unnecessarily tearing everything apart.
Thanks!