What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

DYNON SERVO SHEAR PIN REPLACEMENT

RV-4

Well Known Member
Hi Gents

Is there anyone here who will have pictures on how to replace the shear pin on a Dynon Autopilot servo?

Dynon a while back published pictures and procedures on how to replace the shear pins but I can't find it anywhere.

Your help will be appreciated.

Thanks

Bruno
[email protected]
 
Included in the kit

The shear pin replacements are available free from Dynon. The kit contains the shear pin and instructions which include illustrations.
 
Shear screw replacements

Thank you for the video as it shows the dos and don’ts ..

Strait forward process, now I just have to do it and see if the screw is actually broken..which might explain why the autopilot is unstable in pitch..

Thanks again Gents for your help

Bruno
 
Shear Screw replacement

Thank you Carl for the info, it's appreciated..

I checked the servo today and the shear screw appears to be fine.Tomorrow I will do the test as suggested by Carl and will also re-calibrate the servo in flight to see if it will be acting up..

Thanks again everyone

Bruno
[email protected]
 
Back
Top