I used a 40 inch piece of RG400 coax with the outer braided shield stripped. I epoxied the inner portion to the upper side of my wingtip.
Don,
Please help me understand....did you run RG400 from your audio panel all the way out to the wing and strip off the last 40", or did you only use a 40" section in the wingtip attached by smaller wires back to the audio panel?
Thanks,
Tony
Tony,
I epoxied the 40 inch stripped section to the wingtip. I have about another 18 inches of "pigtail" with a BNC connector on it. The RG400 will run from the audio panel out to the wingtip and connect there to that pigtail. This facilitates removing the wingtip when necessary.
Don