I'm getting pretty close to first start and am curious if you guys dumped what I'm guessing to be about a quart into the oil cooler before doing the Lycoming pre-oil procedure?
Or did you following the Lycoming procedure and start cranking it without the plugs until the oil cooler and everything else was filled with oil?
I was also planning on not purging the fuel and oil pressure lines as I hear from many they don't do it and it's not necessary, would love to hear opinions on this one too.
Thanks!
Or did you following the Lycoming procedure and start cranking it without the plugs until the oil cooler and everything else was filled with oil?
I was also planning on not purging the fuel and oil pressure lines as I hear from many they don't do it and it's not necessary, would love to hear opinions on this one too.
Thanks!