VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 02-11-2020, 05:05 PM
RickWoodall's Avatar
RickWoodall RickWoodall is offline
 
Join Date: Jan 2007
Location: Ontario Canada
Posts: 1,458
Default Anti splat great service

I have a bought a few products form Antisplat over the years. My control lock was their first model and did get a bit of a bend. Emailed them and even though its old old old...no questions asked upgraded new model parts shipped out free. Nice.

I have to say that is one think that is truly amazing in the the homebuilt community...customer service from everyone from Mahon at Mattituck many years ago, air gizmos kosh booth taking my 10 year old gustlocks to replace free of charge, Antisplat sending new parts, Even Scott and Tanya Card giving me a special part for my new CQ headsets to help with some hearing issues i have. Just awesome people putting out good stuff..and there year after year backing it up. Well done and its a pleasure sending people like that money.
__________________
Rick Woodall C-GSTT "ghost"
9a -TMX io-320, catto three blade, dual dynon hdx with a/p. 900+ hrs in 8 yrs flying.

Flew to Osh 11,12,15,17,19. SNF 2013. West to Cali /Washington/Vancouver/crossed the Rockies north to Red Deer east to Moosonee and over to maritimes. South to Jekyll Isl, cedar key, and Key West etc. 6 trips and 17 islands of the Bahamas. Flown turtles and dogs for Pilots n Paws too. Love our Rv's

Last edited by RickWoodall : 02-11-2020 at 05:08 PM.
Reply With Quote
  #2  
Old 02-11-2020, 05:33 PM
Maxrate Maxrate is offline
 
Join Date: Dec 2008
Location: League city, TX
Posts: 580
Default

I have to agree! Every time I?ve called Allan?s been willing and ready to help. So far I?ve been sold on the, almost RV14 mod, the wheel bearing mod, oil separator, prop wrench, VS bracket mod, jack points and currently working on the cowling and thinking of the EZ cool cowl flap. Great products from great people to make a great plane even better. I?ll also give a shout out to Vince at Flyboys for the super track mod and JD air parts for the high quality tail wheel assembly. Everyone that?s made this hobby truly a great experience.
__________________
Mark Malone, RV7
Wings complete, SB 14 complied with, canopy and cowling in progress, Up on the gear.
N442MM reserved
http://www.mykitlog.com/MikeMike

2021 Donation gladly paid..
Reply With Quote
  #3  
Old 02-11-2020, 06:06 PM
abwaldal@gmail.com abwaldal@gmail.com is offline
 
Join Date: Jan 2017
Location: Battle Ground WA
Posts: 97
Default best in usa

I third the service from Anti-splat. Great products and people
Art
Reply With Quote
  #4  
Old 02-11-2020, 06:54 PM
RV7 To Go RV7 To Go is offline
 
Join Date: May 2011
Location: Ontario, Canada
Posts: 288
Default

+ another...gust lock, oil cooler shutter, cowl flap, O2 monitor. Great parts and service!!!
__________________
Al
___________
RV4 - Bought 2013 Sold 2017 after 450 hrs
RV7 - Built in 6.5 yrs & Flying 2017
Reply With Quote
  #5  
Old 02-12-2020, 12:13 AM
Gash's Avatar
Gash Gash is offline
 
Join Date: Aug 2009
Location: Goodyear, Arizona
Posts: 905
Default

+1

Allan always answers his phone (or one of the guys there), and he'll stay on the phone with you for as long as it takes. What a great guy!
__________________
Karl, Goodyear, Arizona (KGYR) ATP, CFII
RV-14A
Yak 50
=VAF= donor 2021
Reply With Quote
  #6  
Old 06-05-2020, 06:56 PM
Rvator97 Rvator97 is offline
 
Join Date: Jan 2020
Location: California
Posts: 42
Default Anti Splat Aero - Great products and service!

Purchased a 7A earlier this year.... heard about Anti Splat Aero . After checking out their website and videos, I purchased and installed their ?nose job? kit, and a few other items. Very impressed With the quality of the products, fast delivery, and they are always available to answer questions.
Last week end I decided I wanted to get their nose wheel bearing mod. After removing the nose wheel , I was planning on shipping it to them, but after noticing that they were within 60 mi , I called and asked if I could drive over and drop off the wheel. I was told that was no problem and it would be done on Tuesday.
When I arrived at the shop at 1pm, Allan met me and told me that he could do the job right away if I wanted to wait! I went to lunch and in less than an hour the job was done! He also installed a new tire & tube when he noticed that my old tire was severely out of round!😊
Allan took some time to show me around and discussed some of their other products. After learning about their vertical stab bracket, I decided that I wanted a set. Allan handed me one, and when I offered payment, he refused... saying,? you?re a good customer.... take it?!
I highly recommend Anti Splat Aero.... great products and awesome service!
Walt
RV -7A 57LW
Reply With Quote
  #7  
Old 06-05-2020, 07:01 PM
Dave12 Dave12 is offline
 
Join Date: Oct 2010
Location: Elkton, Md.
Posts: 1,673
Default

Can?t beat em!
__________________
Wag Aero Sport Trainer built,sold and wrecked
N588DF RV12 #336 built, sold and alive and well in New York
N73DF RV12 #244 built, sold and alive and well in Florida
N91 RV RV9 I wish I could say I built this one! Mark Santoleri hit the ball out of the park on this gem.
Reply With Quote
  #8  
Old 06-06-2020, 01:52 PM
Stewbronco Stewbronco is offline
 
Join Date: Sep 2019
Location: Langley BC
Posts: 182
Default Great Customer service

I agree totally....excellent transaction
Reply With Quote
  #9  
Old 06-12-2020, 06:59 PM
Dave H. Dave H. is offline
 
Join Date: Apr 2013
Location: Oceanside
Posts: 42
Default

Comments on your Almost a 14 mod? Difficulty? W/B change? Gotchas?

-D
Reply With Quote
  #10  
Old 06-12-2020, 07:49 PM
Paul K Paul K is offline
 
Join Date: Mar 2009
Location: Grand Rapids, MI
Posts: 1,008
Default Installed the almost a 14 mod

I installed this and love it! I was having back problems because I couldn?t recline my seat enough and this totally took care of it. I had a hard time removing rivets holding the old seat back to the side angles and had to remove the slider tracks to get to them. A real pia! Needless to say, this was full days job but worth it! I also polished the stainless and it looks and is holding up beautifully and painted the ?finish cap? to match the rest of the interior. One caution, I need to purchase the seat wedges from Classic Aero to raise my butt up so I can see over the panel. By being reclined I have a lot more headroom! Recently flew from Michigan to Philadelphia and back, no back discomfort at all!

Finally, I agree with all said about Allan. In addition, I have the nose job, nose wheel bearing, main wheels bearings, gust lock, oil cooler shutter, and the O2 monitor. All perform better than advertised! Thanks Allan!
__________________
Paul K
West Michigan

Unfortunately in science, what you believe is irrelevant.

2021 donation made, exempt but worth every dime!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:48 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.