VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 04-16-2021, 02:52 PM
BealeStAviator BealeStAviator is offline
 
Join Date: Mar 2020
Location: Clovis, NM
Posts: 15
Default Prop Gov Return Spring Issue

Got my CS propeller all rigged up. Having a strange issue with the prop control lever. It moves freely for about half its range of motion. About halfway back toward the coarse/high pitch position it starts to engages the return spring on the governor. This results in the lever springing forward to the mid-range point once it is released. I've never seen this on a prop control before so it seems like its not designed to operate that way. I'm not really sure what to adjust to fix it. I'm also not sure what the purpose of the return spring is and Hatzell's governor manuals are scant.

Any ideas?
__________________
RC
RV-8
USAF: KC-135 Navigator, U-28 Combat Systems Officer
Reply With Quote
  #2  
Old 04-16-2021, 04:45 PM
MED MED is offline
 
Join Date: Jul 2015
Location: Aiken, SC
Posts: 769
Default

I installed a throttle quadrant on my RV-14A and discovered the prop governor spring was strong enough to cause the prop lever to creep unless the friction lock was engaged. I spoke with Hartzell and they indicated the aerobatic community had discovered this issue and they could provide a weaker spring. Problem solved. Turns out, this issue was a primary reason a throttle quadrant was not offered as an option for the 14 as it is for the 10. An easy solution, however, to keep an old Piper pilot from having to learn to use the push-me-pull-me vernier controls.
__________________
MED
140236
N435MD
Miss March 2020
Reply With Quote
  #3  
Old 04-17-2021, 08:24 AM
lr172 lr172 is offline
 
Join Date: Oct 2013
Location: Schaumburg, IL
Posts: 6,326
Default

Is this an S series governor? When set up properly, the return spring should be applying resistance to ANY movement of the governor arm off the fine pitch RPM stop. I believe it is set up this way so that any breakage of the cable or components will put the prop in fine pitch, as well as to account for slop in the cable assembly and maintain a precise RPM. It is likely that someone took the arm off and allowed the piece below it (the circular steel piece with the arm that catches the return spring) to come off and didn't not re-install it properly. There is a special procedure to get it back on properly and with the correct spring tension.

Do you have the hartzell maintenance manual? It has the procedure for installing that piece that catches the spring. It is not hard to accomplish. It is not in the owners manual, as they don't expect folks to remove that part. Normally the arm can come off without removing the piece below it if care is taken.

Larry
__________________
N64LR - RV-6A / IO-320, Flying as of 8/2015
N11LR - RV-10, Flying as of 12/2019

Last edited by lr172 : 04-17-2021 at 08:58 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:30 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.