Bolt pattern ?

If someone knows how the enginemount attaches to the firewall on a shortgear RV-4 that would save me 2 hours in the car..

I about to fabricate a 'rolling service cart' for my 320 in its enginemount and needed to roughly know where the bolts will end up so I can prefabricate the other stuff in the shop.

I don't think gear leg length effects the bolt pattern on the firewall. The specs are on the drawing for the firewall ( I don't have the drawing number, but if you have a preview set of plans, it will be there).

Mike

I don't know. But I seem to remember that people going from short to long gear found that the holes in the firewall no longer were in the right place