VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 10-11-2021, 11:11 PM
olegusan olegusan is offline
 
Join Date: Aug 2014
Location: Melbourne, Australia
Posts: 38
Default Second VHF antenna

Hi all,

I'm going to install a second radio in my RV12 and trying to figure out the best place for the second antenna.

Can anyone share their experience with the subject?
__________________
Oleg
RV-12 # 120877 VH-TAO (Flying)
Melbourne, Australia
Build log:www.RV12.com.au
My DIY Avionics: ExperimentalAvionics.com
Reply With Quote
  #2  
Old 10-12-2021, 02:16 PM
12vaitor 12vaitor is offline
 
Join Date: Aug 2012
Location: Panama City, FL
Posts: 196
Default

I added my second comm antenna on top of the tailcone behind the ADAHRS location. In addition to a doubler plate at the antenna location, I added some J-channel reinforcement between the frames. The skin thickness seemed too thin to handle the drag load specified by the antenna manufacturer. Similar problem to the ADARHS mounting area that required a doubler to stiffen the mount.

The other problem is running another coax cable down the center channel, I ended up adding another set of pass through bushings to handle the cables for the Garmin GPS antenna, NAV/LOC antenna, and Comm 2.

https://flic.kr/p/2mAcd3T

John Salak
RV12 N896HS
Reply With Quote
  #3  
Old 10-12-2021, 07:35 PM
rcarsey's Avatar
rcarsey rcarsey is offline
 
Join Date: Jul 2012
Location: North Brunswick, NJ
Posts: 270
Default

I'm following this. I have a ham radio antenna (146Mhz) that I've been meaning to install, but haven't pulled the trigger on yet. Unsure of how close is too close .. the frequency is close enough to aviation band that it can be an issue.

Maybe if I put it out on a wing, I won't have to install a rudder trim tab
__________________
Rob Carsey, North Brunswick NJ
RV-12iS (N713) / Completed 12/2020
ASEL, Glider, AGI/IGI, LSRM-I, FCC GROL
Reply With Quote
  #4  
Old 10-12-2021, 08:57 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 3,146
Default

I installed a second Com and put the antenna on top of the fuselage about 3 feet behind the rear window.
Reply With Quote
  #5  
Old 10-13-2021, 11:04 AM
turbo's Avatar
turbo turbo is offline
 
Join Date: Jan 2007
Location: Stuart, FL /Hartford, CT/Virgin Gorda,BVI
Posts: 3,162
Default

I have two coms and an ils/vor on the bottom spaced about 3 feet apart, vor at the tail end.
__________________
TURBO YES =VAF= Payed Jan2021
Ed D'Arcy
RV6-A 5,300+ hrs, R-44 1,600 hrs, Helicycle traded for 33 FFR coupe, 300 young eagles flown
Stuart, Fl / S WINDSOR,Ct / Virgin Gorda, BVI - villa sold.
VAF #840 EAA AOPA FAC FABA QB SPA
addicted pickle ball player
https://i.postimg.cc/tn3h4svg/IMG-3101.jpg
Reply With Quote
  #6  
Old 10-13-2021, 12:08 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 3,146
Default

When I installed the cat whiskers for a VOR/ILS I drilled out the blind rivets securing the fiberglass vertical stabilizer cap, mounted the whiskers on top and replaced the cap over the whiskers using screws and nut plates in place of the rivets.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:08 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.