RV-4 Landing gear intersection Fairings

is there a source for the RV-4 Landing gear intersection fairing to the fuselage. to purchase?

This place has them. I don't know how good they would fit as all RV-4/6 are different but..

http://www.fairings-etc.com/Intersection_Fairings.html

Fairings

I used those fairings and they required quite a bit of trimming to fit. But they were of very nice quality.

Don't forget one thing however. The gear on a RV4 not only flex outward on landing, but they flex rearward. Thus you must leave a little space between the intersection fairing and the rear of the gear leg fairing.

Jim

N4444JT

Intersection fairings

Thanks all. I'll try the purchase route first just don't want to start with the clay.

acropilot said:

Thanks all. I'll try the purchase route first just don't want to start with the clay.

Click to expand...

Are you installing gear leg stiffeners?