Woodliness
Member
Just starting my RV-10 build. Looking to see if any has a POH I can look at to give me some ideas on starting mine?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
POH
- Thread starter Woodliness
- Start date
Mike S
Senior Curmudgeon
Woodliness
Member
Thank You! I appreciate the help
RV10 Turning Radius
RV10 Turning radius / pavement width
Little fun project for my POH / AFM.
Maybe someone will find it useful.
1 - Max. Differential Braking Required to Complete a Minimum Radius 180 Degree Turn As Shown
A - Wing Tip Radius: 6 m (19' 9")
B - Elevator Outboard Edge Radius: 5.2 m (17' 2")
C - Outside Main Gear Radius: 2.4 m (7' 9")
D - Nose Wheel Radius: 2.2 m (7' 1")
E - Pivot Point
NOTE: Use at your own risk.
RV10 Turning radius / pavement width
Little fun project for my POH / AFM.
Maybe someone will find it useful.
1 - Max. Differential Braking Required to Complete a Minimum Radius 180 Degree Turn As Shown
A - Wing Tip Radius: 6 m (19' 9")
B - Elevator Outboard Edge Radius: 5.2 m (17' 2")
C - Outside Main Gear Radius: 2.4 m (7' 9")
D - Nose Wheel Radius: 2.2 m (7' 1")
E - Pivot Point
NOTE: Use at your own risk.
Attachments
Last edited:
