As many of you know the new airworthiness certificates and ops limits come on full sheets of paper that are thick indeed. This has of course made it more difficult to mount elegantly.
I happened to be perusing Walmart and found something that was almost custom made for the job! Not to mention it will be the cheapest RV mod there is! haha
If you look at the pics you can see what you will need to mount the certificate and how I chose to do it. Hardest part was deciding what to line it up with. This holder is fairly thick but not too thick; it is perfect. It is just thin enough that a good pair of scissors will cut right through it. Just put the papers in and trim to fit. I then slapped some Velcro adhesive strips on the back and mounted it to the fuse.
Anyways, this question has been asked many times in the past year on VAF so I figured I would post how I chose to do it. Keep in mind the papers can only be folded once. (or so my DAR says)
Hope this helps!
I happened to be perusing Walmart and found something that was almost custom made for the job! Not to mention it will be the cheapest RV mod there is! haha
If you look at the pics you can see what you will need to mount the certificate and how I chose to do it. Hardest part was deciding what to line it up with. This holder is fairly thick but not too thick; it is perfect. It is just thin enough that a good pair of scissors will cut right through it. Just put the papers in and trim to fit. I then slapped some Velcro adhesive strips on the back and mounted it to the fuse.
Anyways, this question has been asked many times in the past year on VAF so I figured I would post how I chose to do it. Keep in mind the papers can only be folded once. (or so my DAR says)
Hope this helps!