34-02 Step2: My AN509-10R16 #10 screws do not want to pass through the opening drilled into my canopy frame. The instructions say to use a cutter with a #12 pilot. So for others at this point I plan to use a #10 drill.
AN509-10R16 the 10 means a #10 screw
The screw is 3/16 inch in diameter.
A #10 drill hole is slightly larger than 3/16 inch.
A #12 pilot is slightly smaller than a #10 drill hole.
So as I understand it the #10 drill will leave room for both the smaller #12 pilot cutter and the 3/16