rapid_ascent
Well Known Member
I'm looking at OP-56 and trying to understand the wiring connections. I've reviewed the Aeroleds Suntail installation instructions and I'm trying to match up what Van's is showing. It looks like there is a chassis ground difference, but I could add that if I decide I want to.
More specifically what I'm trying to understand is the black wire connection. Page 2 shows it looping around and then connecting to aft most bulkhead. The right most side where it loops around is where my question is. Aeroleds suggest using 3 wire shielded wire with the shield being used for the ground connection. So at the light end a wire has to be connected from the shield to the light wiring. Is this drawing saying a second wire is connected to the shield and then tied to the frame?
More specifically what I'm trying to understand is the black wire connection. Page 2 shows it looping around and then connecting to aft most bulkhead. The right most side where it loops around is where my question is. Aeroleds suggest using 3 wire shielded wire with the shield being used for the ground connection. So at the light end a wire has to be connected from the shield to the light wiring. Is this drawing saying a second wire is connected to the shield and then tied to the frame?