After several minor adjustments to the AOA Aluminum Connector Tube that connects the plumbing in the wing to the fuselage, I am unable to achieve a good test. I am loosing approximately 10kts of airspeed in 20 seconds versus the 1 minute guideline.
Does anyone have a method of adjusting the connector tube to achieve a leak free system? The good news is the syringe at the AOA rivet / port is now sealed. The air must be leaking from this connector tube / assembly.
Thanks
Rich
Does anyone have a method of adjusting the connector tube to achieve a leak free system? The good news is the syringe at the AOA rivet / port is now sealed. The air must be leaking from this connector tube / assembly.
Thanks
Rich