What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Electrical Installation Question

Brett H

Active Member
While working on installing the wiring today, I noticed that one of red heatshrink bands that marks the installation location on the length of the wiring slipped.

Can anyone verify what these lengths should be?

I currently have from the end of the connector to the red band:

WH-00050 Transponder 12 inches
WH-00051-1 Com 18 1/2 inches
WH-00095 ADS-B 14 inches

Thanks.

Brett
Columbus, IN
 
Brett -

For reference, on the WH-00046 wiring harness the first red band is located approximately 23" from the connector and the second band is located 62" from the connector.
 
John:

Thanks for your response.

Regarding the location of the red band on the antenna cables, I asked Van's and got the following response:

WH-00050 Transponder Antenna Cable 12" from the non-BNC connector and 38" from the BNC end

WH-00051-1 Com Antenna Cable 7.5" from the BNC connector

WH-00095 ADS-B Antenna Cable 11.5" from the BNC connector

It was very helpful that hear that the red bands can slip. Because, mine did.

Brett
Columbus, IN
 
Back
Top