What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

One last thing to do after Phase 1 is done.

FulltronAviation

Custom RV painting by Fulltron
Advertiser
I just finished Phase 1 flyoff and started cleaning up the hangar, changing from a workshop back to a real hangar again. I had Stein build my panel, and when my panel arrived it was packed in a custom wooden crate. The lid of the crate was laser engraved with my actual panel. I made a quick to Walmart to buy a woodburning kit and then write (burn is more accurate) dates when I started construction and did the first flight. Then varnish the entire lid and hang it in my hangar. It makes an eye catching conversation piece in the hangar, and brings back lots of good memories of the time spent building my RV-14. Just another touch of class you get when Stein builds your panel...
 

Attachments

  • IMG_3968.jpg
    IMG_3968.jpg
    341.7 KB · Views: 374
  • IMG_3972.jpg
    IMG_3972.jpg
    319.9 KB · Views: 299
No woodburning but I used it on a workbench backstop:

IMG_0519.jpg
 
Back
Top